Setting Up Trimble GPS Devices with TerraFlow Mobile
Learn how to configure your Trimble R Series, Spectra, or Catalyst DA2 GPS receiver with TerraFlow Mobile for high-accuracy data collection with RTK corrections.
Time needed: 5-10 minutes
Before you start:
Have your Trimble ID credentials ready
Ensure you have an active Catalyst License or RTK License assigned to your Trimble ID
Have your TerraFlow ID credentials ready
Ensure your Trimble GPS device is fully charged
Know your region (Canada or United States) for coordinate system configuration
Verify you have an active RTK correction service (NTRIP or Trimble Catalyst)
Have access to Google Play Store or Apple App Store for app downloads
Using TerraFlow Mobile
Step 1: Download and Install Required Applications
Install all necessary applications from the Google Play Store or Apple App Store before configuring your GPS.
Open the relevant Store on your device
Search for and download Trimble Mobile Manager
Search for and download TerraFlow Mobile
Install both applications
Trimble Mobile Manager manages GPS settings and corrections, while TerraFlow Mapper handles data collection. Both applications work together to provide high-accuracy positioning.
Step 2: Pair the Trimble GPS Device
Connect your Trimble GPS receiver to your device via Bluetooth.
Power on your Trimble GPS device (R Series, Spectra, or Catalyst DA2)
Verify the blue light is flashing, indicating the device is ready to pair
Open Settings on your Android device
Navigate to Connections > Bluetooth
Tap Scan to search for available devices
When your Trimble GPS appears in the list, tap it to pair
Enter the pairing code if prompted
The blue flashing light indicates the GPS is powered on and ready to pair. Once paired successfully, the device will appear as "Connected" in your Bluetooth settings.
Step 3: Configure Trimble Mobile Manager
Set up your GPS connection, corrections, and coordinate system settings in Trimble Mobile Manager.
Open Trimble Mobile Manager
Log in using your Trimble ID credentials
Connect to your paired GPS device
Navigate to Configuration
Trimble Mobile Manager must connect to your GPS before you can configure settings. Ensure the Bluetooth connection is active.
Step 4: Configure NTRIP Settings (If Not Using Trimble Catalyst)
If you're using an NTRIP correction service instead of Trimble Catalyst, configure your connection now.
In the Configuration section, set the GNSS correction source to "Custom Local" and then locate NTRIP settings
Enter your NTRIP server details:
Server address
Port number
Mount point
Username and password
Test the connection to verify corrections are being received
If you're using Trimble Catalyst for corrections, skip this step—Catalyst handles corrections automatically through your license. Leave the GNSS correction source as "Auto"
Step 5: Configure Regional Coordinate System Settings
Set the correct output coordinate system and geoid model based on your work region.
Option A: Canada
If you're working in Canada:
Locate Output settings in Configuration
Select Select from list
Set GNSS output to: NAD83(CSRS) v7 (EPOCH:2010)
Set Geoid to: Canada CGG2013A (NAD83)
These settings ensure your GPS coordinates align with Canadian spatial reference standards.
Option B: United States
If you're working in the United States:
Locate Output settings in Configuration
Select Select from list
Set GNSS output to: NAD83(2011) (EPOCH:2010)
Set Geoid to: GEOID18 (Conus)
These settings ensure your GPS coordinates align with U.S. spatial reference standards.
Step 6: Configure Location Settings in TerraFlow
Connect TerraFlow to your Trimble GPS and configure coordinate transformation settings.
Open your TerraFlow Mapper product
Tap Settings
Scroll down to Location Settings
Select TMM-API from the Location Provider dropdown
TerraFlow will now use the high-accuracy positioning from your Trimble GPS device instead of the mobile device's internal GPS.
Step 7: Configure Coordinate Transformation in TerraFlow
Set the correct coordinate transformation to match your Trimble Mobile Manager configuration.
Option A: Canada
If you're working in Canada (and configured NAD83 CSRS in Trimble Mobile Manager):
In Translation to WebMercator, select:
NAD83 CSRS --> WebMercator
Option B: United States
If you're working in the United States (and configured NAD83 2011 in Trimble Mobile Manager):
In Translation to WebMercator, select:
NAD832011 ITRF 2014 --> WebMercator
This transformation must match the coordinate system you configured in Trimble Mobile Manager. Mismatched settings will cause positioning errors.
Step 8: Start Up
TMM-API startup instructions.
Have your antenna turned on and the blue light should be blinking
Start TerrFlow Mobile
Open the Map
Trimble Mobile Manager will automatically open
Select your device (DA2 for example) if prompted
System should switch you back to TerraFlow Mobile (if not, swipe up and switch back)
TerraFlow will recieve positions from Trimble Mobile Manager now
Troubleshooting
Trimble GPS not appearing in Bluetooth scan?
Verify the GPS is powered on (blue light flashing)
Ensure the GPS is within 10 feet of your mobile device
Check that the GPS battery has sufficient charge
Turn Bluetooth off and on again on your mobile device
Try restarting the Trimble GPS device
Can't log in to Trimble Mobile Manager?
Verify your Trimble ID credentials are correct
Ensure you have an active internet connection
Confirm your Catalyst or RTK license is assigned to your Trimble ID
Try resetting your Trimble ID password if needed
Contact Trimble support to verify your license status
Trimble Mobile Manager won't connect to GPS?
Verify the GPS is paired in Bluetooth settings
Ensure the Bluetooth connection shows as "Connected"
Close and reopen Trimble Mobile Manager
Try unpairing and re-pairing the GPS device
Restart both the mobile device and GPS
GPS accuracy showing meters instead of centimeters?
Open Trimble Mobile Manager and verify correction data is being received
Check that your RTK/Catalyst subscription is active
Verify NTRIP settings are correct (if not using Catalyst)
Ensure you have a clear view of the sky (no obstructions)
Wait 1-2 minutes for RTK solution to initialize
Wrong coordinate system configured?
Verify you selected the correct regional settings in Trimble Mobile Manager
Ensure TerraFlow coordinate transformation matches your Mobile Manager settings
Canada: NAD83 CSRS in both applications
United States: NAD83 2011 in both applications
Incorrect settings cause positioning offsets—reconfigure before collecting data
TerraFlow not using GPS coordinates?
Verify "TMM-API" is selected as Location Provider
Ensure the GPS has an active connection (check Bluetooth settings)
Confirm Trimble Mobile Manager shows the GPS is connected
Catalyst license not working?
Verify the license is assigned to your Trimble ID in your Trimble account
Ensure the license hasn't expired
Check that you're logged in with the correct Trimble ID
Contact Trimble support to verify license activation
Tips for Success
License verification: Confirm your Catalyst or RTK license is active before heading to the field
Clear sky view: RTK corrections require unobstructed view of satellites for best accuracy
Battery management: Trimble GPS battery life varies by model—charge overnight before field sessions
Initialization time: Allow 1-2 minutes after powering on for RTK solution to stabilize
Regional settings matter: Double-check you've selected the correct country settings in both applications
Accuracy monitoring: Always check accuracy indicator before saving critical points
Indoor limitations: High-accuracy GPS doesn't work indoors—switch to device GPS if needed
Correction source: Trimble Catalyst is simpler than NTRIP but requires an active subscription
Backup plan: Know how to switch to device GPS if RTK corrections are unavailable
Regular updates: Keep Trimble Mobile Manager updated for latest features and compatibility
Coordinate matching: TerraFlow transformation must match your Trimble Mobile Manager output settings
Related Articles
Need more help? Contact TerraFlow Support at support@terraflow.ca